Table of Contents
Advertisement
i,.mlll I
J:
II
11111
Using Wireless Flash
*
o
Approx. 10m
(32.8ft. )
[~
(A:B C)] Multiple slave units in multiple groups
This is a variant of the [-.
(A:B)] setup on the preceding
page. This setup has group C
eliminate the shadows
created by groups A and B.
Refer to your Speedlite's
instruction manual to set the
slave 10 of the three slave units
to A (Group A), B (Group B),
and C (Group C) and position
them as shown in the
illustration.
1
Set [Firing group] to
[~
(A:B C)].
Set the desired flash ratio and
shoot.
.~
Select [A:B fire ratio] and set the
flash ratio.
~
Set flash exposure compensation for
group C as necessary.
I
[iI
@
If [Firing group] is set to [-. (A:B)], group
C
will not fire.
~
If group C is pointed toward the main subject, overexposure may result.
125
Advertisement
Table of Contents
