Preset Tuning; Station Name - Sony MHC-MG510AV Operating Instructions Manual

- Preset Tuning
Preset radio stations m the tuner's memory first
(see "Presetting radio stations" on page 18).
1 Press TUNER/BAND repeatedly to
select "FM" or "AM"
2
Press - l44 or W + (or l44 or HI
on the remote) repeatedly to tune In the
desired preset station.
Preset number Frequency
To listen to non-preset radio stations
Use manual or automatic tuning in step 2.
For manual tuning, press H or W
repeatedly. For automatic tumng, press and
hold M or M
Tips
l
When an FM stereo program has static noise, press
STEREO/MONO repeatedly until "MONO"
appears. There will be no stereo effect, but the
receptmn will Improve.
* To improve broadcast reception. adjust the supplied
antennas or connect a commercially available
external antenna.
- Station Name
You can label each preset station with up to
12 characters (Station Name).
You can also label preset stations usmg an
optronal keyboard (see "Labeling titles through
the keyboard' on page 27).
1
Tune the desired station you want to
label (see "Llstenmg to the radio" on
this page).
2 Follow the same procedures as from
steps 3 to 9 of "Labeling a CD" on
page 16.
To check the preset number and
frequency
The station name appears when you tuned the
labeled station.
To check the preset number and frequency,
press DISPLAY The preset number and
frequency are displayed for 4 seconds and it
returns to the station name display
To erase the name
1
Tune the station.
2 Press MENU.
3 Press I44 or HI repeatedly to select
"NAME IN", then press ENTER.
4 Press CLEAR repeatedly to
erase the name.
5 Press ENTER.
19