Client Setup - D-Link DCS-3110 User Manual

Section 4 - Configuration
To configure the settings for media streaming and recording, please read the following definitions.
Stream Select which video stream profile to use.
Options:
Protocol There are 4 protocols for you to choose for video
Options: streaming.
UDP Protocol: This is recommended because it is an ideal protocol
for transmitting real-time audio and video data, which
can tolerate some lost packets.
UDP Unicast: Stream to a single computer.
UDP Multicast Stream to multiple computers using multicast
streaming.
TCP: Provides higher quality video streaming than UDP
and provides error correction. However, transmission
speed will be reduced.
HTTP Protocol:
Offers the highest image and video quality. However,
packet loss will diminish image quality when
bandwidth becomes restricted. If the network is
protected by a firewall and it opens HTTP port (80)
only, HTTP protocol must be selected. In this mode,
audio is disabled and only video can be viewed. UDP connections will not be available to remote users if all four ports have not
been forwarded (as shown on page 43). Only the HTTP port must be forwarded for remote users to make an HTTP connection
(video only).
Record
Allows the user to specify a destination folder and prefix filename for the recorded video.
Options:
D-Link DCS-3110 User Manual

Client Setup

30