Radio Operations - Clarion CZ100 Owner's Manual & Installation Manual

Radio Operations
Select tuner as playing source
Press [SRC] button once or more to enter
radio mode.
Select one radio band
Press the [BAND] key on the panel or [BND]
key on the remote control to select one radio
band among FM1, FM2, FM3, AM.
Manual tuning
During manual tuning, the frequency will be
changed in steps.
Press the [
~
]/[
~]
key· on the panel to
tune in a higher / lower station.
Auto tuning
Press and hold the [ ~ ]/[ ~ ] key on the
panel or remote control to seek a higher /
lower station.
To stop searching, repeat the operation
above or press other keys having radio
functions.
Note:
When a station is received, searching stops
and the station is played.
If the unit receives a stereo broadcasting,
the indicator light of stereo 'ST' on the LCD
display will be lighted.
Auto store
Only stations with sufficient signal strength
will be detected and stored in the memory.
Press and hold the
[PSI AS]
(2 sec.) to start
automatic station search.
To stop auto store, press other keys having
radio functions.
Notes:
1. After auto store, the previous stored
stations will be overwritten.
2. The unit has 4 bands, such as FM 1, FM2,
FM3 and AM. FM3 and AM can store
by AS function. Each bands can store 6
stations, CZ100 can store 24 stations in
total.
Manual store
When one expected radio station has been
detected, press and hold number key 1-6 to
store it in the memory.
Recall the stored stations
Press one numeric key among 1 to 6 on
the panel to select the corresponding stored
station.
Local seeking
When LOCAL seeking is on, only those radio
stations with strong radio signal could be
received.
To open or close LOCAL function, press and
hold the [ADJ] key on the front panel, then
press [
~
] key repeatedly until LO or OX
displays on the screen, rotate the knob to
select Local or Distant mode.
Note:
The number of radio stations that can be
received will decrease after the local seeking
mode is on.
10
CZ100