Table of Contents
Advertisement
The XPOWER High Velocity Blower / Fan is intended to move air
and to dry floors, walls, furniture etc. Durable and easy to operate
with an effective balance of static pressure and airflow suitable for
a variety of applications.
1.
XPOWER Blowers / Fans are shipped ready to be put into
service. Prior to plugging in the unit into the power source
inspect the unit completely for any shipping damage.
2.
Plug the electrical cord into a 3-prong GFCI outlet.
3.
Carefully place the Blower / Fan unit on a stable flat dry
surface.
4.
The unit has a four position capability to aim airflow across flat
surfaces or angled upward.
5.
Turn the switch to the desired speed and make sure it is
operating correctly
6.
All Blowers / Fans in operation must be supervised at all times.
Timer Instruction
Use the Timer to set the preferred time from
1 min to 180 min.
Operation / Instructions
(Applicable for Model X-430)
BLOWER / FAN
:
STORAGE
Stackable
Units can be
stacked (up to 4)
on their sides for
storage.
NOTICE:
1.Stacking
feature is not
secure for
transportation.
2.Remove the
filters before
stacking.
Advertisement
Table of Contents
