2. Hardware Installation
2.1 PSTN connection
Unplug your telephone cord from the wall jack. Using the supplied telephone wire, connect one end
to the "LINE" port of MICON T20/30, another to the wall jack as shown in Fig.1
Note: 1. PSTN service is required for VoIP call forwarding feature to function properly.
2. The MICON T20/30 has to be installed as the first device on your incoming telephone
line if you would like to utilize all household phones for making and receiving VoIP calls.
Fig A. Front View
Fig B. Back View
Fig.1 PSTN Connection