Select A Location - Micon T20 User Manual

MICON T-30 VoIP Switch
Skype-PSTN Forwarding ("Skype-Out")
Input PSTN Forwarding Number
√ Enable Skype-PSTN Forwarding (7342613828)
PSTN-Skype Forwarding ("Skype-In")
Enable PSTN-Skype Forwarding (free dial)
Input Skype-Forwarding Speed Dial Number
√ Enable PSTN-Skype Forwarding (24)

Select a location

Testing
About
Exit
5. Appendix: Q&A
► Question 1. After I install MICON T20/30, all speaker outputs, including my
favorite MP3 goes to MICON T20/30. How to re-direct all other output to my
original sound card?
A
•Windows installer automatically set MICON T20/30 as the default windows audio device. To
correct this issue you can either change the setting in each audio program or reconfigure the
default audio setting for Windows as following:
"\ Start \ Settings \ Control Panel \ Sounds and Audio Devices \Audio \ Sound playback and
Sound Recording" to choose your original sound card as the playback or recording device.
If you choose the later route, you will need to configure Skype to use the MICON T20/30 as the
sound device by click on "Tools\Options\Sound Devices"
► Question 2. Do I need to connect an outside PSTN line to the "Line" port to use
MICON T20/30?
A :
No. It is only optional. However PSTN line is required when you want to use the same phone for
both Skype calls and PSTN calls and want to forward your skype calls to your mobile phone or
other PSTN phone (T20/T30) or when you want to make Skype calls from your mobile phones
(T30 only).