Hitachi LE22EC05AU User Manual page 32

Menu Options in TV Mode (Cont.)
PVR File system (DTV only)
Insert your USB device (FAT32 format only) into
the USB port.
Press or [OK] to enter the sub-menu, where
you can check the USB device connected for
recording.
Press / to select "Check PVR File System",
then press [OK] to start checking. This process
will take a few seconds. At the end of the
process, the word "SUCCESS" will appear after
"Check PVR File System" and the speed will
be shown on the menu as well. You can now
record and save the DTV programme.
NOTE: We recommend using a hard disk with built-in power supply.
Aspect ratio
Press / or [OK] to enter the sub-menu, then press / to change the aspect ratio
to Auto, 4:3, 16:9, Zoom1, Zoom2, Just Scan. (16:9 is the default setting.)
NoTE: Just Scan is panoramic display, so black edging may appear according to the
data rate. Auto and Just Scan may be not available in some sources.
Blue screen
Press / or [OK] to set the blue screen display to On or Off. Set to On it will display
a blue screen when there is no signal on the currently selected source.
First time installation
Press or [OK] to enter relevant options including OSD language and channel
tuning (see page 17 for more detail).
Reset
Press or [OK] to enter the sub-menu, then press to select Yes to restore factory
default settings.
Software update (USB)
Press or [OK] to select this setting for software updates that the manufacturer may
supply. Detailed information will be sent with the software for updating.
32