How To Send Availability Notifications - Kyocera Dura Series How To Use Manual

Sprint direct connect

Hide thumbs Also See for Dura Series:

How to clean (6 pages)

Table of Contents

Wait for "Push to Talk" to appear onscreen.

Press and hold the DC button.

Wait for a tone to sound and "Me" to appear onscreen before you begin talking.

4. Release the DC button to listen.

5. Press

to end the call.

Make a Direct Connect Call From Contacts:

1. In standby mode, press CONTACTS (right softkey).

2. Highlight an entry and press and release the DC button.

3. Continue the Direct Connect callas described previously.

How to answer calls with Direct Connect

When you receive a Direct Connect call, you'll hear an incoming tone or the phone will vibrate, depending on your

settings. You'll see the Direct Connect number and the caller's name (if available) on your screen. You may also

hear the caller's voice through the speakerphone. The default for Direct Connect calls has the speakerphone on.

You can turn the speakerphone off and listen to Direct Connect calls through the earpiece as you would a regular

call, or you can listen through a headset.

1. Press

or the external speaker button to either enable or disable the Direct Connect speakerphone

feature.

If you enable the Direct Connect speakerphone (

speakerphone on the front of the phone.

If you disable the Direct Connect speakerphone ( ), you will only hear the caller's voice through the

earpiece.

2. Accept the incoming call.

3. When the caller has finished speaking, you will hear a tone and see "Push to Talk" on the display.

4. Press and hold the Direct Connect button and wait for a tone to sound and a message ("Me") to appear

onscreen.

Tip: Press

or the call list button to dismiss an incoming Direct Connect call.

[Return to Table of Contents]