Factory Settings; Passwords - GE Security DVMRe Pro User Manual

3.19 Factory Settings

Return To Factory Defaults
From the Factory Setting menu, press the Enter button. A
password box will appear. Enter the Factory Default password.
Select OK, then press the Enter button.
The unit will reboot, returning all settings (except the time, date,
email addresses, and email IP address) to the factory defaults.
Due to the large size of the hard disk, the reboot may take several
minutes.
Change Language
From the Factory Setting menu, enter the Language password.
A menu will appear displaying the available language selections.
Rotate the Jog to select the desired language.
Save changes and exit the menu: Press the Enter button.
Exit the menu without making changes: Press the Menu button.
Available Languages:
English
Italian
Czech
Slovak
Danish

3.20 Passwords

Use this feature to change the Installer, Operator, Ethernet, or DDNS
passwords.
Changing the Installer or Operator Passwords
To change the password:
1. Highlight the password you wish to change, then press the
Enter button. A password box will appear.
2. Enter the new password using the Number buttons.
3. Highlight OK, then press the Enter button.
4. Re-enter the password.
5. Highlight OK, then press the Enter button. The user will be
prompted, indicating if the password was entered correctly
and changed.
0150-0294B
French
Russian
Finnish
Spanish
62
Factory Default Password
10 and 16-Channel
4-Channel
Language Password
10 and 16-Channel
4-Channel
German
Polish
Hungarian
Dutch
Password Box
Enter a new Install Password
----
GE Security DVMRe Pro
8 1 1 1
4 1 1 1
5 4 1 5
1 4 1 4