Recording - GE Security DVMRe Pro User Manual

Searching Recorded Data
The DVMRe Pro has a powerful search interface feature that allows the user to
search for data on the internal hard disk. The user may search the data for
previous recording sessions, text insertion, and alarm conditions. Because the
search interface is so dynamic, the search interface is covered in detail in a
separate section of this manual. See section 5.

2.5 Recording

To begin recording, press the Record button. Recording will be indicated by the
LED located directly above the Record button. The unit always starts recording
at the end of previously recorded data. The unit will continue recording until the
record button is pressed again, unless Record Lock is ON.
The DVMRe Pro also remembers its current record mode in the event of power loss. If the unit was
recording during a power loss, then when power is restored the unit will put itself back in that mode.
Monitor Displays During Recording
Multiscreen Live and Playback displays on Monitor A and Monitor B are not affected by recording
operations.
Playback Mode
Triplex Mode
0150-0294B
Monitor A
LIVE
Stop Mode
PLAY
BACK
LIVE
PLAY
BACK
20
Search Button
Record Button
Monitor B
LIVE
LIVE
LIVE
GE Security DVMRe Pro