Auto Power Down; Lg Sound Sync - LG NB2540 Owner's Manual

16 Operating

Auto power down

This unit will power off itself to save electric
consumption in the case main unit is not
connected to external device and is not used for 20
minutes.
So does this unit after six hours since Main unit
has been connected to other device using analog
input.

LG Sound Sync

3
You can control some functions of this unit by
your TV's remote control with LG Sound Sync. It is
compatible with the LG TV that supports LG Sound
Sync. Make sure of the LG Sound Sync logo on your
TV.
Controllable function by LG TV's remote control :
Volume up/down, mute
Refer to the TV's instruction manual for the details
of LG Sound Sync.
Make one of the following connections, depending
on the capabilities of your equipment.
,
Note
y You can also use the remote control of
this unit while using LG Sound Sync. If you
use TV's remote control again, the unit
synchronizes with the TV.
y When the connection fails, make sure of the
condition of the TV and power.
y Make sure of the condition of this unit and
the connection in the cases below when
using LG Sound Sync.
- Turn off the unit.
- Changing the function to the others.
- Disconnecting the optical cable.
- Disconnecting the wireless connection
caused by interference or a distance.
y The amount of time to turn off this unit is
different depending on your TV when you
set AUTO POWER function to ON.
NB2540-NB.ADEULLK_ENG.indd 16
With wired connection
1. Connect your LG TV to the unit by using an
optical cable.
2. Set up LG Sound Sync (Optical) on the TV. Refer
to the TV's instruction manual.
3. Turn on the unit by pressing 1 (Power) on the
remote control.
4. Select OPTICAL IN function by using OPTICAL
on the remote control or F on the unit until the
function is selected.
TV sound will be outputted from the soundbar
if connecting normally between this unit and
your TV.
Optical
cable
2014-02-07 9:55:38