10/100 Dual-Speed And 100Base-Tx Hubs; Switch To Switch (Or Other Devices) - D-Link DES-1008D User Manual

10/100 Dual-Speed Switch User's Guide

10/100 Dual-speed and 100Base-TX Hubs

For 10/100 Dual-speed and 100Base-TX hubs, the switch's LED
indicators should illuminate as follows:
♦ 100M indicator is ON.
♦ Link/Act is ON.
♦
FDX LED indicator is OFF.

Switch to Switch (or other devices)

The DES-1008D Dual-speed Switch can be connected to another
switch or other devices (routers, bridges, etc.) via a two-pair
Category 3, 4, 5 UTP/STP straight or crossover cable. When
connecting the DES-1008D to a 10 Mbps (only) Ethernet device, a
Category 3, 4 or 5 UTP/STP cable can be used; a connection to a
10/100 dual-speed or 100 Mbps Fast Ethernet device needs to use
Category 5 or better UTP/STP.
Figure 4.3 DES-1008D Uplink connections using straight and
crossover cables.
24
Connecting The Switch