D-Link GO-RT-N300 User Manual page 27

Section 3 - Configuration
When you have finished configuring the WAN settings, click the Apply Changes button.
If you choose PPPoE, please configure the following fields:
WAN Access Select PPPoE from the drop-down menu.
Type:
User Name:
Enter the user name provided to you by your ISP.
Password:
Enter the password provided to you by your ISP.
Idle Time:
Enter the idle time (in minutes) after which the router will
disconnect due to inactivity. To disable this feature, select
Continuous as the connection type below.
MTU Size:
Enter the Maximum Transmission Unit size. The default value
is 1492.
Static IP If your ISP or network administrator requires you to have a
Address:
static IP address for your connection, enter it here.
Connection Select Continuous,.Connect.on.Demand,.or Manual as the
Type: connection type from the drop-down menu. If you select
Manual, the connect and disconnect buttons will be available.
When you have finished configuring the WAN settings, click the Apply Changes button.
D-Link GO-RT-N300 User Manual 23