Table of Contents
Advertisement
2) Press the volume/
/- key to select CIDCW.
3) Press the select key to toggle and turn on Caller ID on Call Waiting.
4) Press the menu key and return the handset to the base unit to complete the
setting. The handset returns to standby mode.
Setting Name Tag (POP ID)
The Name Tag feature works with the Caller Display number from Caller ID. You must
subscribe to Caller ID service through your local telephone provider to use this feature.
There is usually a fee for this service. When the phone rings the caller display number,
when received will be compared to numbers stored in the dial memory. If there is a
match then any name stored with the dial memory number will be displayed (see page 21).
1) When the phone is in standby mode, press the menu
key. The following screen appears.
2) Press the volume/
/- key twice to select
Name Tag .
3) Press the select key to toggle Name Tag On or Off.
4) Press the menu key to complete the setting.
The handset returns to standby mode.
[12]
Name Tag
:On
Name Tag
:On
Advertisement
Table of Contents
