BMW HP4 Rider's Manual page 90

6
88
Without height sensor on the
front wheel:
Adjust compression damping on
the front suspension strut.
The separate adjustment of
z height sensors required for
rebound and compression
damping is not offered by
BMW Motorrad. Available at
racing accessory stockists.
You can request more detailed
information by sending an email
to "hp-race-support@bmw-
motorrad.com".
Calibration of height
sensor
Calibration of height sensor on
the rear suspension strut, e.g.
after changes to the suspension
height ( 97).
Engine speed for shift
light ON
Engine speed for shift light ON in
rpm.