BMW HP4 Rider's Manual page 55

Open lock 1 in the rear seat
cover with the ignition key.
Lift the cover at the rear and
then work it back and up to
remove.
Installing rear seat cover
Engage the rear seat cover in
mounts 2 on left and right.
Swing the rear seat cover
down, pushing it lightly forward.
Lock the lock with the ignition
key.
Removing rear seat
with Passenger Bundle
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Open seat lock 1 with the igni-
tion key.
Lift the rear seat at the rear
and then work it back and up
to remove.
Remove the ignition key from
the lock and place the rear
4
53
OE
z