BMW HP4 Rider's Manual page 47

Customising the DTC function
( 94).
Installing coding plug
Switch off the ignition.
with reduced power output,
OE
79 kW
The following applies to
motorcycles with power re-
duction: Once the coding plug
has been inserted, the choice
of modes includes SPORT and
RACE with increased engine
power. The significantly more
sporty response in these modes
can lead to hazardous situations.
It is important for the rider in-
tending to use these more sporty
ride modes to familiarise himself/
herself with their characteristics.
The following applies to
motorcycles with power
reduction: Inserting the cod-
ing plug voids homologation for
riding the motorcycle on public
roads.
Do not use the coding plug for
riding these vehicles on public
roads.
Switch off the ignition.
Remove the front seat (
Dirt and moisture can pen-
etrate the open plug and
lead to malfunctions.
Reinstall the cap after removing
the coding plug.
Open cable tie and remove cap
from plug connection 1.
54).
To do so, press retainer 2 and
pull the cap up.
Install coding plug and secure
plug connection with a new
cable tie.
Switch on the ignition.
4
45
z