Memorising speeds
This memorisation of speeds applies to both the speed limiter and the cruise control.
You can memorise up to 5 speeds in the system. By default, a few speeds are already memorised.
With your Audio system
Go to the main menu by pressing the
"MENU" button.
Select the "Personalisation-configuration"
menu and confirm.
Select "Vehicle parameters" menu and
confirm.
Select the "Driving assistance" line and
conform.
Select "Speeds memorised" line and
confirm.
Modify the speed.
Select " OK " and confirm to save the
modifications.
For safety reasons, the driver must
only carry out these operations when
stationary.
With the eMyWay satellite
navigation system
Go to the main menu by pressing the left
hand thumb wheel at the bottom of the
steering wheel.
Select the "Vehicle parameters" menu and
confirm.
Select the "Driving assistance" line and confirm.
Select the "Speeds memorised" line and
confirm.
Modify the speed.
Select " OK " and confirm to save the
modifications.
These operations are only possible
when stationary with this system.
Access
Press the "MEM" button to display the list
of speeds memorised.
Selection
To select a memorised speed:
press and hold the " + " or " - " button; the
system stops at the nearest memorised
speed,
press and hold again the " + " or " - " button to
select another memorised speed.
A reminder of the speed and the state of the
system (on/off) is displayed in the instrument
panel.
225
Driving