CITROEN C4 2004 Handbook page 188

B3EP15YC
B1BP36YC
CHECKING AND SETTING THE VALVE TIMING
[1] Camshaft setting peg
[2] Crankshaft setting peg
[3] Timing belt retaining pin
[4] Adaptor for angular tightening
[5] Hub immobilising tool
[5a]
[5b]
Pliers for removing plastic pins
IMPERATIVE: Respect the safety and cleanliness requirements.
Checking and setting the timing.
Removing.
Disconnect the negative terminal of the battery (see corresponding operation).
Raise and support the vehicle, front wheels hanging.
Remove the auxiliaries drive belt (see corresponding operation).
Unclip and move aside the fuel supply hose from the timing cover.
Remove the screw (1).
Move aside the power steering pipes.
Turn the engine by means of the screw (4) of the crankshaft pinion (3) to bring it to the pegging position.
185
Engine: RFK
Tools.
: (-).0189.A
: (-).0189.R
: (-) 0189.K
: 4069-T
: (-).0189.S
: (-).0189.S1
: (-).0189.S2
: 7504-T