Changing foglamp bulbs
These bulbs are replaced from outside the rear bumper:
pass your hand under the bumper,
turn the bulb holder a quarter turn and
remove it,
turn the bulb a quarter turn, pull it out and
fit a new bulb.
For reassembly, carry out these operations in
reverse order.
Take care not to touch the silencer;
there is a risk of burns if changing a
bulb within a few minutes of switching
off the ignition.
Changing a fuse
Access to the tools
The extraction tweezer is fitted to the back of
the dashboard fusebox cover.
For access to it:
unclip the cover by pulling at the top right,
then left,
disengage the cover completely and turn it
over,
Practical information
remove carrier on which the tweezer is
fitted.
263