Sharp GX30i User Manual page 46

Press A [Save].
5.
If you have selected "Choose before Saving" when
saving, the memory card is not inserted, or memory
has run out, press a or b to highlight "Save to
Handset" or "Save to Card", then press
"Saving (file name) to My Stuff..." is displayed,
then the picture is registered.
Press F to return to standby.
6.
Remaining shots indicators
123: Indicates the remaining number of pictures
that can be taken.
***: Indicates the remaining number of pictures
that can be taken exceeds 999.
???: Indicates a memory card is not inserted or
cannot be recognized by the phone. (When
"To Memory Card" is selected for the "Save
New Pictures" option)
---: Indicates setting of "Save New Pictures" is
"Choose before Saving".
46 Camera
Tip
• Pressing E during standby also activates digital
camera mode.
• If you wish to send a picture by multimedia message
after taking the picture, press
.
Large MMS messages may cause the size of attached
pictures to be reduced.
• To leave digital camera mode without registering the
taken picture after step 4, press F and then press A
[Yes].
• When the distance to the subject is approximately 10
cm, set the macro switch to the macro position (
When the distance to the subject is approximately 40
cm or more, set the macro switch to the normal
position (
before step 5.
).
).