Sharp GX30i User Manual page 113

To Specify the Types of Notes and Rests
Specify notes and rests by pressing P or R
repeatedly.
P P
( ) ( )
When you make a dotted note or a triplet, press O after
selecting the target note.
Note
• You cannot make a dotted semiquaver (semiquaver
rest) or a dotted semibreve (semibreve rest).
• Three continuous notes are required for a triplet.
To specify a tie, press N after selecting the target notes.
An underscore (_) is displayed next to the note, and the
note is tied with the next one.
To enter the next note, press d and move the cursor to
the right. Then, repeat the operation on the previous page.
If the cursor is positioned next to a note, you can repeat
the note immediately left of the cursor when a or b is
pressed.
P P
( ) ( ) ( )
P
To Set the Tone
The phone can play notes using different instruments.
You can select from 128 basic tones (8 types of: Pianos,
Chimes, Organs, Guitars, Basses, Strings 1, Strings 2,
Brasses, Reeds, Flutes/Pipes, Synth Leads, Synth Pads,
Synth Effects, Ethnics, Percussions, and Effects) and
61 extended tones (40 types of Drums (FM) and 21
types of Drums (WT)).
1.
Perform steps 1 to 13 in "Creating Your Original
Ringtone" on page 110.
Press a or b to highlight "Set Tone", then press
2.
or A [Select] to select.
Press c or d to highlight a category of the tone.
3.
Press a or b to highlight a tone.
4.
When you press A [Options] and select "Play
Current Part", the melody entered is played back in
the selected tone.
When you press A [Options] and select "Confirm
Tones", the syllable names are played back in the
selected tone.
5.
Press to select.
Now you can create an original ringtone.
Applications 113