Sharp GX30i User Manual page 136

Assigning the Pictures
Pictures can be displayed when turning the power on or
off, when receiving an incoming call, or when
operating the alarm.
Pictures taken by a digital camera or images
downloaded from a WAP site can be used.
To Set Built-in Pictures
1.
Perform steps 1 to 3 in "Opening the Phone Settings
Screen" on page 129.
Press a or b to highlight "Main Display", then
2.
press to select.
Press a or b to highlight "Assign Pictures", then
3.
press to select.
Press a or b to highlight the screen to set the
4.
picture, then press
Press a or b to highlight "Animation 1" or
5.
"Animation 2", then press
select "Power On" or "Power Off" in step 4.
Or press a or b to highlight "Pattern 1" or
"Pattern 2", then press
"Incoming" or "Alarm" in step 4.
The selected animation or picture is displayed.
6.
Press to set.
136 Settings
to select.
to select when you
to select when you select
Tip
• To cancel the picture setting, select "Default", then
press in step 5.
To Set My Pictures
1.
Perform steps 1 to 3 in "Opening the Phone Settings
Screen" on page 129.
Press a or b to highlight "Main Display", then
2.
press to select.
Press a or b to highlight "Assign Pictures", then
3.
press to select.
Press a or b to highlight the screen to set the
4.
picture, then press
Press a or b to highlight "My Pictures", then
5.
press to select.
Press a or b to highlight "Handset Memory" or
6.
"Memory Card", then press
The file name of the pictures that are registered in
the selected memory is displayed.
to select.
to select.