Changing The Status Of The Key - Yaesu VX-8GE Operating Manual

M
ISCELLANEOUS
C
By factory default, the g key keeps the status while pressing and holding the g key
down. You may change the status of the g key to keep the status for approximately
three seconds after pressing the g key, after which time it reverts back to its previous
status.
1. Press and hold the m key for one second to enter the Set Mode.
2. Rotate the DIAL knob to select Set Mode Item 99: VOL-
UME MODE.
3. Press the m key briefly to enable adjustment of this Set
Mode Item.
4. Rotate the DIAL knob to select the desired mode.
The g key keeps the status while pressing
NORMAL:
and holding the g key down.
AUTO BACK: The g key keeps its status for approxi-
mately three seconds after pressing the g key.
5. When you have completed your selection, press the PTT switch to save the new
setting and exit to normal operation.
120
S
ETTING
S
HANGING THE TATUS OF THE
VX-8GE O
K
EY
M
PERATING ANUAL