Tuning Settings Menu; Adjusting Country; Auto Tuning; Manual Tuning - UMC X19/16A-GB-TCD-UK User Manual

19_22_26_16 english manual 14.pdPage 1 28. 7. 2008 13:18:34
TV MENU OPERATION

TUNING SETTINGS MENU

Adjusting Country

If you are moving country you may wish
to change the Country Settings
1) Press [LCD-MENU] to enter menu
2) Press [>] to move to Tuning Settings Menu
3) Press [\/] to highlight Country
4) Press [>] to alter the chosen country
5) Press [EXIT] to exit

Auto Tuning

Scan for all channels based on the current settings
1) Press [LCD-MENU] to enter menu
2) Press [>] to move to Tuning Settings Menu
3) Press [\/] to highlight Auto Tuning
4) Press [>] to enter Auto tuning
5) Press [OK] to start the tuning
6) Press [EXIT] to exit

Manual Tuning

You may wish to manual search if you can't find a
certain channel or if you wish to connect to a
Satellite/Cable box via RF/Aerial connector
1) Press [LCD-MENU] to enter menu
2) Press [>] to move to Tuning Settings Menu
3) Press [\/] to highlight Manual Tuning
4) Press [>] to enter manual tuning
5) Press [>] to highlight Start Screen
6) Press [>] to start
7) Press [EXIT] to exit
Program Edit / Changing Channel Position
(Only TV Mode)
You can change the analogue channel
position to suit your requirements.
1) Press [LCD-MENU] to enter menu
2) Press [>] to move to Tuning Settings Menu
3) Press [\/] to highlight Program Edit
4) Press [>] to enter the program edit menu
1. BBC 1
2. BBC 2
3. ITV
4. CHAN 4
5. CHAN 5
5) Press [EXIT] to exit
Common Interface Slot (Only in Freeview Mode)
Pay per view services require a "smartcard" to be inserted
into the TV. If you subscribe to a pay per view service the
provider will issue you with a 'CAM' card "smartcard".
The CAM can then be inserted into the COMMON
INTERFACE PORT (see page 8). To access the card
follow the steps below.
1) Press [LCD-MENU] to enter menu
2) Press [>] to move to Tuning Settings Menu
3) Press [\/] to highlight Common Interface
4) Press [>] to enter the menu
5) Press [EXIT] to exit
14