Adjusting Tint; Adjusting Sharpness; Adjusting Colour Temperature; Dynamic Noise Reduction - UMC X19/16A-GB-TCD-UK User Manual

19_22_26_16 english manual 12.pdPage 1 28. 7. 2008 13:16:30
TV MENU OPERATION
PICTURE SETTINGS MENU

Adjusting Tint

Lets you increase or decrease the level
of tint within the picture
1) Press [LCD-MENU] to enter menu
2) Press [\/] to highlight Tint
3) Press [>] to increase the tint
or [<] to decrease the tint
4) Press [EXIT] to exit

Adjusting Sharpness

You can change the sharpness between
the different preset options
Normal For standard use
Sharp For pictures with little movement
Sharpest For pictures with nearly no movement
Soft For pictures with large amount of movement
Softest For pictures with lots of movement
1) Press [LCD-MENU] to enter menu
2) Press [\/] to highlight Sharpness
3) Press [>] to increase the sharpness
or [<] to decrease the sharpness
4) Press [EXIT] to exit

Adjusting Colour Temperature

There are 3 presets for colour temperature
Normal Standard setting
Warm Increased red within the picture
Cold Increased blue within the picture
1) Press [LCD-MENU] to enter menu
2) Press [\/] to highlight Colour Temperature
3) Press [>] to navigate through the
various options
4) Press [EXIT] to exit

Dynamic Noise Reduction

Reduces the interference in the picture.
1) Press [LCD-MENU] to enter menu
2) Press [\/] to highlight DNR
3) Press [>] to switch between ON and OFF
4) Press [EXIT] to exit
12