Table of contents 1. Ready in just 3 steps ! 2. Introduction 3. How to wear the pedometer correctly 4. Select a function (MODE) The function TIME The function STEP COUNTER The function DISTANCE The function KCAL 5. Battery replacement 6.
1) Press the “MODE” button until “STEP” appears on the right side of the display. 2) Press and hold the “RESET” button until the display shows zero. 3) Position the PE101S as upright as possible on your body at hip height. -> and off you go The display now registers the number of steps.
Page 4
The pedometer could be a device to monitor your training. Another option is to include your pulse. For this Irox offers you a selection of watches with pulse monitoring (www.irox.com), e.g. the Irox Phan X2. The main features of the PE101S are listed here and their functions will be explained in detail on the following pages:...
How to wear the pedometer correctly The PE101S is equipped with a digital movement detector that measures every movement, also your steps, disregarding the position of the device. Because every person moves a bit differently, we recommend wearing the PE101S as follows:...
Please read the corresponding instructions on how to proceed. The function TIME The PE101S also serves as a watch by displaying the time. Setting the time To set the time press and hold the SET button for approximately 2 seconds or until the seconds’ indicator blinks.
(less than 3-5 seconds) it will not count anything. But if you stand up thereafter and constantly move about the first steps you made will appear and the PE101S will continue counting from there. So basically no steps are lost.
Support This device is a new development of Irox Development Technology. All information was made and checked by means of a functioning instrument. It may occur that adjustments and improvements of the device will take place that due to typographical procedures were not able to be listed in this manual.
Need help?
Do you have a question about the PE101S and is the answer not in the manual?
Questions and answers