Alesis Performance Pad Reference Manual page 39

5.4I Copy a Song to Another Song (or to the End of Another Song If That
Song is Not Empty)
1. The Performance Pad should be in Song and Perform modes.
2. Select the Song to be copied with the number or INC/DEC buttons.
3. Press and hold the COPY button, and keep holding it down until step (6). The
display says COPY TO SONG with the number of the currently selected Song.
4. While continuing to hold the COPY button, enter the destination Song number to
which the source Song should be copied using the number or INC/DEC buttons.
5. While you continue to hold the COPY button down, press PLAY. The copy is
complete, and the display says COPY DONE.
6. Release the COPY and PLAY buttons.
Notes
• If the destination Song was empty, the copy is identical to the source Song.
• If the destination Song was not empty, then the source Song is appended to the end
of the destination Song. This increases the destination Song's length by the length of
the source Song; if the total destination Song length would exceed 254 steps after
copying, the copy will not take place, and the display will say SONG TOO LONG.
35