Usb Module Installation - Acer Picasso Service Manual

4. Remove module support bracket (B).
5. Remove module (C). (Figure 3-61)
Figure 3-61. Removing USB Module

USB Module Installation

1. Align module with bezel guides (B). (Figure 3-62)
Figure 3-62. Aligning USB Module to Bezel Guides
2. Install module on bezel.
3. Install module support bracket (B) on bezel.
4. Install and secure two (2) screws (A) to bezel.
5. Install and connect module FFC (C) to module connector (c).
6. Install speakers.
3-44
B
(Figure 3-60)
(Figure 3-59)
Machine Maintenance Procedures
C
0