Station Installation Guide - PENANDFREE PT Pen User Manual

⑧ Connect the station of PT Pen to the USB port of laptop and check if MINT Control
recognizes the station. If the station is recognized, the color of monitor icon changes
from grey to blue on the toolbar that appears on the right bottom side of the window.

7. Station Installation Guide

• This page describes how to install a Station on your laptop.
7.1 How to install a Station
① Bend a Station at 90° angle and then place the Deco Fixture into the groove as depicted
below.
② Peel off the masking tape (double sided tape) at the back of the Deco Fixture and then
attach to the laptop of left, right or top center based on your preference.
Deco Fixture
13