6.1 Windows OS ................................10 6.2 Mac OS ..................................11 7. Station installation guide .............................. 13 8. Use of PT Pen ..................................15 8.1 How to calibration ..............................15 8.2 Use of pen ................................. 22 9. Product Specification ..............................23...
• Thank you for choosing our product. • This user’s manual describes how to install the PT pen and its functionalities. • This product is a digital pen for presentation purposes. As a digital pen for laptops, the product has the functions of regular mouse as well as tablet PC functions.
2. PT Pen Outline • PT Pen, the presentation pen, is innovative digital pen mouse with a combination of mouse function and pen and supports full features of Microsoft tablet computer. • You can directly write on the screen of your PC as well as annotating in any MS office document.
3. PT Pen Components • The components of PT Pen are a station that attaches to a laptop cover, digital pen, and other accessories as below ☞ Notice - The picture above is for illustration purpose only. Therefore, the actual items may look different from the picture and some items are subject to change.
4. Name and Function of each component • The exterior of PT Pen is explained on this section. • For quick use of the product, please be familiar with the exterior structure of PT pen Receiver Sensor 4.1 Station USB Cable...
For the user convenience and prevention of environment contamination, PT Pen operates with Lithium-polymer rechargeable battery. • The essential particulars about power supply management of PT Pen are explained on this section. 5. 1. Power supply of digital pen •...
5.2 Power supply of station • The station powers up automatically when the USB cable of station is connected to the USB port of laptop, and the LED light comes on of the station. • To turn the power off, separate the station from the USB port of laptop. 5.3 Charging equipment management •...
5.3.2 Verification of LED indicator LED indicator of Pen Contents • The battery of pen is low, so charging by the connection of LED light blinks quickly charging cable required. • Pen is not charging. LED Light OFF • Verify that the charging cable is properly connected to the pen and USB port.
6. Software installation guide • Install the software provided with the product is required in order to use PT Pen. ☞ MINT Control: Setup tools where users can set up a pen position, language, and virtual whiteboard calibration.. ☞ MINT Interactive :...
‘MINT Note’ shortcut icons will appear on the desktop as shown in the picture below. ⑥ Connect the station of PT Pen to the USB port of laptop and check if MINT Control recognizes the station. If the station is recognized, the color of monitor icon changes from grey to blue on the toolbar that appears on the right bottom side of the window.
Page 12
④ Select the language if required. The default is set in accordance with the language of user’s PC operating system. Language of user’s PC operating system is set as a default. ⑤ Begin the software installation by clicking ‘Install’. ⑥ Click ‘Next’...
⑧ Connect the station of PT Pen to the USB port of laptop and check if MINT Control recognizes the station. If the station is recognized, the color of monitor icon changes from grey to blue on the toolbar that appears on the right bottom side of the window.
Page 14
③ Attach the station in the center of whichever side you preferred. Be careful not to attach it tilted. ④ After attaching the Station on the laptop, connect the USB at the end of Station to the USB port of laptop. If the laptop is turned on, a blue light will appear on the LED on the front side of Station, and the product will automatically be recognized.
Even if a laptop successfully recognizes a Station, it may not operate properly until the software is installed. 8. Use of PT Pen 8.1 How to calibrate A. Calibration - Windows OS ① Connect the Station to PC and execute “MINT Control’ on desktop. After executing it, you can see and check the Station position, language, and calibration in Setup menu as shown in the picture below.
Page 16
② After setting the Station position as user’s preference, click the ‘calibration’ button and then picture shown below will appear. Click the center of the each circle displayed on the screen. ③ Click ‘Sophisticated calibration’ if the pointed arrow doesn’t accurately convey where the pen engages the target after the ordinary calibration’s done.
Page 17
B. Calibration – Mac OS ① Connect the Station to PC and execute “MINT Control’ on desktop. After executing it, you can see and check the Station position and calibration in ‘Calibration menu’ as shown in the picture below. ② After setting the Station position as user’s preference, click the ‘calibration’ button and then picture shown below will appear.
Page 18
③ Click ‘Sophisticated calibration’ if the pointed arrow doesn’t accurately convey where the pen engages the target after the ordinary calibration’s done.
Page 19
C. How to use PT Pen on an external monitor • This section explains how to use PT Pen on dual monitors. ① Connect your PC to an external monitor and then go to Control Panel ->Display -> Adjust resolution -> Select the master monitor based on your preference -> Select ‘Extend these displays’...
Page 20
④ Case1: using it on Monitor 1 Mount the station on Monitor 1 and lightly touch the screen of Monitor 1 with the Pen. Execute MINT Control and calibrate. Monitor 1 Monitor 2 Lightly touch the screen with the Pen.
Page 21
⑤ Case2: Using PT Pen on Monitor 2 Mount the Station on Monitor 2 and press ‘Enter’ on your PC. What’s being displayed on Monotor1 will appear on Monitor 2 as soon as you press the Enter key. Touch the screen of Monitor2 when display appears.
8.2 Use of pen • When using a pen, grab it just as you grab a pencil or pen and write at a natural writing angle. • When using a pen and a laptop, please remove any object in between the Station and the Pen.
9. Product Specification Model PMNA-03 Product Name PT-PEN for laptop Operating Area 170mm ~ 358mm (Maximum of 15.4 inches wide LCD) Applied Technology Infrared rays and ultrasonic wave technology Response Frequency Approximately 13m Sec Recognition Device HID Pen Device Resolution 600 DPI Operating System Windows XP / Vista/ 7/ 8, Mac OS 10.6 and above...
10. General Troubleshooting This section provides troubleshooting information for users who are having trouble while using our product. Pleases check the chart below. If you are experiencing problem and that is not listed in the chart then please contact our CS center or visit the nearest shop. Troubles Items to be confirmed Pen is not writing.