Introduction About the product The KeyGrabber USB is an advanced USB hardware keylogger with a huge 16 MB or 2 GB internal flash disk, organized as a file system. Text data typed on the USB keyboard will be captured and stored on the internal Flash Drive in a special file. This data may be retrieved on any other computer with a USB port and keyboard, by switching to Flash Drive mode.
KeyGrabber USB Recording keystrokes Installation of the KeyGrabber USB is quick and easy. Simply plug it in between the USB keyboard and the USB port. No software or drivers are required. The USB hardware keylogger will start recording all data typed on the keyboard to the internal flash disk. Once recording starts, new data will be appended to the end of the log file.
Once keystroke data has been recorded, it may be retrieved on any computer with a USB port. This is done by switching to Flash Drive mode. The KeyGrabber USB and keyboard should be connected in the same way, as during normal recording.
KeyGrabber USB Configuration options The KeyGrabber USB may be configured through the file CONFIG.TXT, placed in the Flash Drive root folder. Use any text editor to prepare such a configuration file, containing the following text: Password=KBS LogSpecialKeys=Medium DisableLogging=No Copy this file to the root folder in Flash Drive mode. The new configuration will be loaded on next power-up.
Low-Speed combos, creating a challenge for all types of USB keyloggers. The aluminum Apple A1243 and A1242 are typical examples: The KeyGrabber USB with the Mac Compatibility Pack features a special Mac Mode (enabled by default), which will convert the keystroke data stream to USB Full-Speed, ensuring proper operation of the keyboard and logging of all keystrokes.
KeyGrabber USB Troubleshooting The KeyGrabber USB will not work with the following hardware configurations: 1. Internal laptop keyboards 2. Bluetooth keyboards 3. USB-PS/2 and PS/2-USB adapters 4. Non-conformant USB keyboards The keyboard is not responding The keyboard connector or the keylogger connector is not inserted firmly. Please check the connection with the USB keyboard and port.