Polaris RANGER RZR 570 Owner's Manual page 93

Air Filter
6. Install a new filter if needed. Do not attempt to clean the air filter.
Install the air filter with the pleats facing upward.
7. Reinstall the air box cover and secure the cover clips. Do not allow
the air box cover to contact the air filter during installation.
8. Reinstall the intake hose and tighten the clamp securely.
9. Reinstall the access panel.
Intake Pre-Filters
The engine and PVT intake pre-filters
are located on the left side of the cargo
box. Inspect both pre-filters before
each use of the vehicle to ensure ade-
quate air flow. If necessary, remove the
pre-filters and clean with soapy water.
Dry with low pressure compressed air.
NOTICE: When washing the vehicle,
always avoid spraying water
directly toward the PVT intake
duct. See page 108 for
recommended washing
procedures.
MAINTENANCE
Engine Intake Pre-Filter
PVT Intake Pre-Filter
89