Fuel Cap; Seat Removal - Polaris RANGER RZR 570 Owner's Manual

Hide thumbs Also See for RANGER RZR 570:
Table of Contents

Advertisement

FEATURES AND CONTROLS

Fuel Cap

The fuel tank filler cap is located on the right
side of the vehicle near the passenger seat.
When refueling, always use either leaded or
unleaded gasoline with a minimum pump
octane number of 87 R+M/2 octane. Do not
use fuel with ethanol content greater than 10
percent, such as E-85 fuel.
Remove flammable material containers from
the box before filling.
Seats
Before operating the vehicle, always push down on all seat backs to
ensure the latches are secure.
Seat Adjustments
Loosen (do not remove) the four screws located on the seat bottom.
Slide the seat forward or rearward to the desired position. Tighten the
screws to 4 ft. lbs. (5.4 Nm). Do not overtighten.

Seat Removal

1. Pull up on the seat latch lever located
under the rear edge of the seat.
2. Tilt the seat forward.
3. Lift the seat upward to remove it from
the vehicle.
4. Reverse this procedure to reinstall the
seat. Make sure the seat tabs at the
front edge of the seat slide under the
seat retainer bar.
5. Press down firmly at the rear of the
seat to engage the rear latch.
28
Fuel Cap
Seat Latch

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

2013 ranger rzr 570

Table of Contents