Instrument Cluster; Indicator Lamps - Polaris RANGER RZR 570 Owner's Manual

Hide thumbs Also See for RANGER RZR 570:
Table of Contents

Advertisement

Instrument Cluster

High water pressure may damage
components. Wash the vehicle by
hand or with a garden hose using
mild soap. Do not use alcohol to
clean the instrument cluster. Do
not allow insect sprays to contact
the lens.
Speedometer
The speedometer displays vehicle
speed in either miles per hour
(MPH) or kilometers per hour
(km/h). See page 42.
Mode Button
Use the MODE button to toggle
through mode options. See page 42
for operation of the modes.

Indicator Lamps

Lamp
Indicates
Vehicle
Speed
Over
Temperature
EPS Warning
(if equipped)
Neutral
High Beam (if
equipped)
Helmet/Seat
Belt
Check Engine This indicator appears if an EFI-related fault occurs.
FEATURES AND CONTROLS
When standard mode is selected, speed displays in
miles per hour.
When metric mode is selected, speed displays in
kilometers per hour.
This lamp illuminates to indicate an overheated
engine. If the indicator flashes, the overheating
condition remains, and the system will automatically
reduce engine power.
This indicator illuminates briefly when the key is
turned to the ON position. If the light remains on, the
EPS system is inoperative. See your authorized
POLARIS dealer for service.
This lamp illuminates when the transmission is in
neutral and the ignition key is in the ON position.
This lamp illuminates when the headlamp switch is
set to high beam.
This lamp flashes for several seconds when the key is
turned to the ON position. The lamp is a reminder to
the operator to ensure all riders are wearing helmets
and seat belts before operating.
Do not operate the vehicle if this warning appears.
Serious engine damage could result. See your dealer.
Speedometer
Rider Information
Center
Condition
Indicator
Lamps
MODE
Button
39

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

2013 ranger rzr 570

Table of Contents