WIRELESS TRANSMITTER SET-UP
Digital Wireless Transmitter
Input port
Channel Selector
CHANNEL
1
Plug the transmitter power
adapter into the power port on
the transmitter. Then, plug the
power adapter into an electrical
outlet.
CHANNEL
4
Turn power on by pressing
the power button on the control
module.
Need Help? Visit our website at www.pyramat.com, send an e-mail to
or call toll-free at 877-591-1012.
LED channel window
ON / OFF
Power on off switch
Power adapter port
2
Turn the power switch on the
front of the transmitter to the "on"
position
CHANNEL
5
Select the same channel as the
transmitter on the PC Chair's control
module by pressing the channel
button. Example: 1–1, 2–2, etc.
Note: Both the transmitter and
control module must be on the same
channel to hear sound.
3
Press the channel button to
select the desired transmitter
channel: Eight channels are
available for the best quality
reception. If you experience
static or poor reception, try
another channel.
6
Turn volume up to hear sound.
6
service@pyramat.com
Need help?
Do you have a question about the PC Gaming Chair 2.1 and is the answer not in the manual?