Main Menu; Installation; Service Searching; Edit - SAB Explorer User Manual

Main Menu

Plug in the receiver. Then press the "" button on the remote control or the
"standby" button on the receiver front panel. The Main Menu screen, the beginning
of the OSD screen, will appear as shown in the following picture. The Main Menu
displays various functions of the receiver or you can select with "CHt t t t ",
"CHu u u u "and the numeric buttons on the remote control. When a function is selected,
the title changes its color. To proceed to the next stage, press the "OK" button on
the remote control. 80

1. Installation

The installation menu allows you to set the
Antenna and various functions, and
customize service. After selecting the
"Main Menu" function and pressing the
"OK" button on the Main Menu screen or
selecting the "Service Searching"
function and pressing the "OK"
button to skip main menu. Use the "CHt t t t ",
"CHu u u u " buttons on the remote control to
select an option and press the "OK"
button to proceed to the next stage. To
move backwards to the previous stage,
press the "Back" or "Menu" button.

1.1 Service Searching

Select "Service Searching" function from
the " Installation" menu and press the
"OK" button. More information about
"Service Searching" function can be
obtained from your sales representative,
the Internet or satellite broadcasting
magazines.
You can use useful function by pressing the
"RED, GREEN, YELLOW, BLUE CORLOR"
buttons.

1.1.1 EDIT

Sat. Name : Select the name of the satellite.
See the Sat list by pressing the "OK" button.
- 14 -