Table of Contents
Advertisement
Lock
Switch the TOGGLE switch to lock the top-panel
keys; this can be enabled to prevent radio settings
from being disturbed.
Follow-Me Scan
"Follow-Me" Scan feature checks a User-assigned
Priority Channel regularly as you scan the other
channels. Thus, if only Channels 1, 3, and 5 (of
the 8 available channels) are designated for "Scan-
ning," the user may nonetheless assign Channel
2 as the "User-assigned" Priority Channel via the
"Follow-Me" feature.
To activate "Follow-Me" scanning, first select the
channel you want to designate as the "User-As-
signed Priority Channel" and switch the
TOGGLE switch to the assigned position. Then
turn the CH selector knob to the "Scanning Start"
channel which has been programmed by your
dealer to activate the scanner. When the scanner
stops on an "Active" channel, the User-assigned
Priority Channel will automatically be checked
every few seconds; if activity is found on the User-
assigned Priority Channel, the radio will switch
between it and the Dealer-Assigned Priority
Channel, if any.
VX-600
O
M
V
PERATING
ANUAL
A
O
DVANCED
PERATION
Follow-Me DW
To set up a "Dual Watch" frequency pair using the
"Follow-Me" feature, select a channel using the CH
selector knob. Now press the assigned Soft key;
pressing the assigned Soft key locks the current
channel as the User-assigned Priority Channel. Now
rotate the CH selector knob to another channel (not
the "Scanning Start" channel). Your radio will now
switch back-and-forth between the currently-se-
lected channel (shown on the CH selector knob)
and the User-assigned Priority Channel.
During "Follow-Me" scanning (after you have
pressed the key), you can set up the "Dual Watch"
feature by rotating the CH selector knob to an-
other channel. The radio will then scan back and
forth between the original User-assigned Priority
Channel and the newly-selected channel.
The Priority Channel you have assigned (before
pressing the key) will be retained in memory un-
til you change it.
Channel Group Selection
The VX-600 is capable of separating its 48
memory channels into any of 3 Groups. There is
no limit as to the number of channels which may
be assigned to each Group. The Dealer will have
11
Advertisement
Table of Contents
