Bluetooth Settings - Kyocera Hydro Elite User Manual

Access the Wi-Fi Settings Menu
> Tools > Settings > Wireless & networks > Wi-Fi.
► Tap
– or –
Tap > Apps
▪ Notify me: Check to notify you when you launch apps and Wi-Fi is available.
Auto-connect Wi-Fi: Check to allow Wi-Fi to automatically turn on.
▪
▪ Tap to open the following option menu.
• Scan: Scan to find Wi-Fi networks.
WPS Pin Entry: Tap to use WPS connection to networks.
•
• Wi-Fi Direct: Tap to use a peer-to-peer Wi-Fi connection.The Wi-Fi client and
the hotspot operation will be disabled while Wi-Fi direct is enabled.
• Advanced: Tap to configure advanced Wi-Fi settings, which include:
▪ Keep Wi-Fi on during sleep: Stays connected to Wi-Fi when the screen
goes to sleep to conserve mobile data usage.
▪ Avoid poor connections: Check to avoid the Wi-Fi network that is not a
good Internet connection.
Wi-Fi frequency band: Specifies the frequency range of operation.
▪
▪ MAC address: Displays the Media Access Control (MAC) address of your
phone when connected to a Wi-Fi network.
IP address: Displays the Internet Protocol (IP) address assigned to your
▪
phone by the Wi-Fi network you are connected to (unless you used the IP
settings to assign it a static IP address).

Bluetooth Settings

Your phone's Bluetooth capabilities let you use wireless headsets, send and receive pictures
and files, and more. For details on your phone's Bluetooth settings, see
Settings Menu on page 162.
178 Settings
> Settings > Wi-Fi.
The Bluetooth