seereal technologies "Cn" Operating Manual page 5

Autostereoscopic 3d display c product line
Hide thumbs Also See for "Cn":
Table of Contents

Advertisement

SeeReal Technologies Cn Display Operating Manual
1. Safety first !
• Individuals who have a poor or no spatial sight
• Pregnant women and
• Individuals under the influence of drugs and alcohol
Termination of use:
SeeReal recommends that you stop using the Cn display immediately if you
experience any discomfort of any nature including but not limited to the side effects
listed above such as headache, nausea, eye strain, dizziness etc. If you are not
feeling better within 15-30 after discontinuing use of the Cn display, we recommend
that you discuss your symptoms with a physician".
Please note the following safety instructions when working with the display:
• The power supply will heat up and this heat has to be dissipated to the
surroundings without any obstruction. Therefore, make sure that the power supply
is not covered and not exposed to any heat sources.
• If used and transported other than in the specified way, damage to the display -
especially to the protective screen - may occur, this way causing risk of injury.
Attention: warranty is only covered when transporting the display exclusively in
original package!
• When adjusting the height and tilting of the display on the display base, make
sure that there is no risk of injury for the user, especially that they cannot catch
their fingers between display and base. If necessary, adjustment should be
carried out together with a second person. Make sure to tighten hand wheel and
lever properly.
• The display may only be used as specified and for no other purposes.
• Under no circumstances is it allowed to open the display. No repair or service
work may be carried out.
• In case the display has to be disposed of, please ensure proper disposal as
electronic waste.
• To comply with EMC standards the product is only allowed to be operated with
the DVI cable included in the product's accessories.
• Always tighten the screws of the DVI cable connector to avoid EMI (electro-
magnetic interference).
• Operation of the monitor will cause the front frame to heat up.
Warning!
This product is compliant with emissions standard EN55022 level A. This
product may cause radio interferences in residential areas. In that case, the
operator may be asked to take suitable measures.
- 5 -

Advertisement

Table of Contents
loading

Table of Contents