Advertisement
K7588ASC
90cm rangehood, wall mount, stainless steel and crystal glass, ASC fitted
PLEASE NOTE the difference in maximum heights between the 'direct
duct to atmosphere' installation and the 'recirculation' installation.
The recirculation installation's maximum height is 1235mm due to the
active recirculation vents necessarily being exposed on each side of
the chimney. The 'direct duct to atmosphere' installation shows the now
redundant recirculation vents being concealed by the lower chimney by
reversing — that is, turning the upper chimney piece 180 degrees on the
vertical.
If a higher chimney height is required for the 'direct duct to atmosphere'
installation, that is, up to 1235mm, simply follow the 'recirculation'
installation and have the recirculation vents exposed, though redundant.
NB: drawings are not to scale — they are to assist only
WARNING: technical specifications and product sizes can be varied by the manufacturer without
notice. Cutouts for appliances should only be by physical product measurements. The above
information is indicative only.
electricity supply
240 volt, 50 Hz
electrical
0.85 metre connected power cord for
connection
plugging to standard 10 amp GPO
wattage
250 watt, 2 x 20 watt halogen globes, 290
watts total
current
1.21 amps
packaged
1040mm x 670mm x 640mm = 0.45m³
dimensions
gross weight
36.35 kg
net weight
29.10 kg
supplied
• instructions for installation, operation,
maintenance
• screws and wall bracket
• 150/125mm diameter ducting adaptor
• recirculation diverter kit
optional
activated charcoal filter cartridge to
slot below the centrifugal motor in the
recirculation installation, part number
08999802
SPEED
net air capacity m
pressure mm H20
wattage
noise dBA
chimney plan detail
code K7588ASC
1
2
/hr
300 470 630 750
3
34
41
125 160 200 250
40
49
253
ID040608
3
4
45
46
56
59
Advertisement
