Troubleshooting Within The Network - Medion Akoya E7220 Instruction Manual

54

Troubleshooting within the Network

Why does an error message appear when I click on the network
environment?
The computer name must be unique on the network and may
not be the same as the work group.
It appears that the network boards are unable to communicate. What
might be the problem?
Maybe one of the used network boards works with a different
speed (e. g. 10 instead 100 Mbit/s) and your network computer
is unable to recognise this. If necessary, set the network driver to
the compatible speed.
If two computers should be linked you require a cross-link cable,
otherwise use a patch cable.
In addition, check the protocols and the configuration.
The data transmission is incorrect or very slow. What might be the
problem?
Maybe you have the wrong cable (UTP / CAT3 or lower) or the
problem is the proximity of a power cord or another source of
interference.
After Sales Support TEL: 1 300 884 987 WEB Support: www.medion.com.au