Cabling - Medion Akoya E7220 Instruction Manual

8

Cabling


Arrange cables so that no one can walk on or trip over them.

Do not place objects on any of the cables.

To avoid damage to your notebook, connect your peripherals (e.g. keyboard,
mouse and monitor) whilst your notebook is powered off. Some devices can be
connected whilst your notebook is in use. These devices usually have a USB
connector. Please follow the appropriate instructions for each device.

Keep the notebook at least one metre (approximately three feet) away from high
frequency and magnetic interference sources (e.g. televisions, loudspeaker
cabinets, mobile telephones, etc.) in order to avoid malfunctions and/or loss of
data.

Please note that only shielded cables shorter than 3 metres (9.84 ft) should be used
for the LPT, COM, USB, IEEE 1394, audio, video and network interfaces with this
notebook. When connecting a printer to your notebook, please only use a printer
cable with double shielding.

Only use power cables/connection cables supplied with the notebook and its
devices as the cables have been extensively tested.

It is recommended to disconnect any cables from your notebook that are not
connected to a peripheral device or are not in use.

Only devices complying with the following safety requirements should be
connected to your notebook: "AS/NZS 60960 Safety of information technology
equipment" or " AS/NZS 60065 Audio, video and similar electronic apparatus".
After Sales Support TEL: 1 300 884 987 WEB Support: www.medion.com.au