Using Multiple Handsets - Silvercrest COCOON M1450 TWIN User Manual

Additional handsets and base units
8.3.1 Automatic selection
If you set the handset to automatic selection, the handset will automatically choose the
closest base unit in standby mode:
1. Press
2. Press 3 or
3. Press
• Press or
3
4. Press
5. Select 'Auto' and press
Info
8.3.2 Manual selection
If you set the handset to 'manual selection', the handset will only search for the base unit you
have set.
1. Press
2. Press 3 or
3. Press
4. Press 3 or
5. Press
6. Select 'Manual' and press
7. Select the base unit using
Important
8.4

Using multiple handsets

Info
8.4.1 Calling another handset
1. Press INT 13 .
• 'Internal' appears in the display.
2. Select the number of the handset (keys 1-5) you wish to call.
3. When you have completed your call, press
8.4.2 Accepting an internal call
• The internal call icon
1. Press
12
OR
1. Lift the handset off its base (as long as the Auto Talk option is enabled, see section
"4.22 Auto Talk")
• The handset number of the calling handset and the
during the call.
2. When you have completed your call, press
30
2 .
11 repeatedly, select 'Handset'.
to confirm.
2
repeatedly, select 'Select Base'.
11
to confirm.
2
When you have activated Automatic base selection and the handset
is out of range on the current base, the handset will only search for
the strongest base in standby (not during communication).
2 .
repeatedly, select 'Handset'.
11
to confirm.
2
11 repeatedly, select 'Select Base' .
to confirm.
2
3 or
The handset must be registered to a base unit before you can select
that base unit.
The functions described below are only possible if more than one
handset is registered to the base unit.
and the number of the calling handset appear in the display.
to pick up the internal call.
to confirm.
2
to confirm.
2
and press
11
8 to hang up.
8 to hang up.
Cocoon M1450 TWIN
to confirm.
2
icon will appear in the display