Setting Up The Charging Station; Inserting The Batteries In A Handset - Silvercrest COCOON M1450 TWIN User Manual

Installation
2.2

Setting up the charging station

Plug the power supply plug into a 230 V socket to start using the charging unit..
2.3

Inserting the batteries in a handset

Warning
1. Open the battery compartment (see below).
2. Insert the batteries in the correct polarity (+ and -).
3. Close the battery compartment.
4. To charge the rechargeable batteries for the first time, place the handset in the base unit
or charging unit for 16 hours. The Charge/In use indicator (LED)
unit lights up.
Info
10
1 Underside of the charging unit
2 Power supply plug
Risk of injury from explosion.
Only use the batteries supplied or their equivalent. Do not use
disposable batteries,
The Charge/In use indicator (LED)
(base unit registration mode, see section "8.1 Registering an
additional handset").
3
1.Battery compartment cover
2.Batteries
3.Rear of handset
1
2
1
+
-
Cocoon M1450 TWIN
on the base
15
flashes at the start
15
-
+
2