Toshiba L243 D Owner's Manual page 55

Q
Connect the NTSC source via a SCART
cable and play. Select Manual setting
A
from the SETUP menu and set the
Colour System to Auto.
Manual setting
Colour system: Auto
EXT 1
Select Change
Q
Use the universal password 1276, then
A
change to a new number of your choice.
Q
Make sure to use cables with the HDMI
®
logo ( ). Some early HDMI
A
equipment may not work properly with
the latest HDMI TV products, due to
adoption of new standards.
Q
Check the correct input has been
A
chosen: S-VIDEO or AV.
Q
After roughly 15 minutes without any
A
input video signal at TV mode, the TV will
turn off to reduce power.
A
Save Back
OK RETURN
55