Charging The Battery - Toshiba TG01 User Manual

Getting started

Charging the battery

You will need to fully charge the battery before
you can switch your Toshiba phone on for the
first time. You can charge your battery in the
following two ways:
• Either plug the AC charger into an AC outlet
and connect it to the charger connector on
your Toshiba phone. When the battery is
fully charged, unplug the AC charger from
the AC outlet and disconnect it from the
phone charger connector by gripping it
tightly and pulling gently,
or
• connect your Toshiba phone to a PC with the
USB cable.
IMPORTANT: Do not remove the battery
while it is charging.
The battery will only achieve optimum
performance after two or three complete
charges.
When charging is complete, disconnect the AC
charger from the power source, or the USB
32
cable from the PC, then disconnect your
Toshiba phone.
Battery information
Battery performance depends on many factors,
such as your service provider's network
configuration, signal strength, the temperature
of the environment in which you operate your
Toshiba phone, the features and/or settings you
select and use, items attached to your phone's
connecting ports, and your voice, data, and
other program usage patterns.
n
NOTE: It is recommended that you save
the data in your phone memory to a PC or
storage card. The manufacturer is not
responsible for data lost or altered due to
battery discharge.
TIP: For information on optimising the
power performance of your Toshiba
phone, see Backlight settings, Power
settings, and Power Saving Settings in
Settings.