Detergent Guide - GE GSC720 Use And Care Manual

Find your model. Locate your model number by
looking on the label fastened to the tub wall just
inside the dishwasher door.
GSC720
CYCLES ENERGY OPTIONS
POT- NORMAL
SCRUBBER WASH
2
GSC900
CYCLES
LIGHT
POT- NORMAL
WASH
WASH
SCRUBBER
2
1
Before you Begin
• Load dishware. (See Loading
section.)
• Make sure the Cycle Indicator Dial
is at the OFF position and the
Cycle On light (on some models)
is OFF.
• Add detergent. (See Detergent
Dispensers and Detergent Guide
sections.)
• Check rinse agent level. (See Rinse
Agent section.)
NOTE: If dishwasher drains into a
garbage disposal, operate the disposal
until it is empty before starting the
dishwasher.
6
OPERATING INSTRUCTIONS
HEATED DRY
ON OFF
STATUS
OPTIONS
TEMP TEMP
CYCLE
BOOST BOOST
ON
ON OFF
2
Select Cycle/Option
*If you want to use a cycle on the
Dial go to Using the Cycles on the
Dial section.
• Latch the door.
• Select your desired wash cycle
and (energy) options.
NOTE: The light over the pads
(on some models) comes ON when
pressed, to indicate the cycle/option
that has been selected. Press pad
firmly until light comes on. These
lights remain on while the door is
latched.
Your dishwasher is designed to give maximum
performance on loads with normal and heavy soils.
Features and appearance may vary
PLATE
WARMER
(PRESS
HEATED DRY)
2
Features and appearance may vary
START
START DELAY
(HRS)
OFF
PLATE
WARMER
(PRESS
HEATED DRY)
RINSE & HOLD
3
3
Turning the Cycle Indicator Dial to
START will begin the cycle
immediately.
NOTE: To obtain the benefits of a
complete cycle, be careful that you
do not turn the Dial any farther than
is necessary to start the dishwasher.
There is a time delay between start-
up and water fill so you will not hear
any wash action right away.
OFF
START
SHORT
WASH
RINSE & HOLD
3
SHORT
WASH
HEATED
DRY ON
HEATED
DRY OFF
2
Starting the Cycle