Wood Panel Trim Kits - GE GSC720 Use And Care Manual

HOW TO CHANGE COLOR PANELS
If you are redecorating, you can change your dishwasher's front panel to
match or blend with your new colors by flipping it over. Each side of each
panel is a different color. You may also paint a panel with a color of your
own choice.
How to Change the Door Panel:
1. Take out trim screws on either side of the
dishwasher door. Remove the side trim.
2. Slide the door panel out.
(Careful—edges may be sharp.)
3. Turn the door panel around and put the color you
want in front.
4. Replace the door panel, side trim and screws.
How to Change the Bottom Panel:
Top
Mounting
Screw
Top
Trim
Bottom Panel Attachment Screws

Wood Panel Trim Kits

Wood panel trim kits contain
trim and instructions for adding
a decorative wood door panel and
lower access panel to match kitchen
cabinets. You supply the wood panels
which should be no thicker than 1/4".
Specify the kit number when
ordering:
GPF40BC (Chrome Trim & Screws)
GPF40BK (Black Trim)
GPF40WD (White Trim)
GPF40AD (Almond)
14
(GSC900 ONLY)
1. Remove the bottom panel attachment screws.
2. Remove the top mounting screws.
3. Take out the top trim screws and remove the
top trim.
4. Slide the color panel(s) up and out and put the
color you want in front.
5. Replace the top trim and screws.
6. Replace the entire assembly by reversing the steps.
Color Panels
If you have redecorated and the
color panels in your dishwasher
do not blend with your new color
scheme you may order an additional
color panel.
Specify the color panel number when
ordering:
GPF24 White/Almond
GPF26 Harvest/Black
GPF27 Black/White
NOTE: Do not operate
dishwasher while changing
panels or when bottom access
panel is removed.
Ordering Information
Color panels and wood panel trim
kits are available at an extra cost
by calling, toll-free, 800-626-2002.
Your order will be sent directly to
your home. Visa, MasterCard and
Discover cards are acccepted.